Wind power combined transformer has many key technical parameters and characteristics

The maximum operating voltage of the wind power combination transformer is 40.5 kV, which can adapt to the application environment of higher voltage and ensure the stability and safety of power transmission. The rated frequency is 50 Hz, which is suitable for standard power system frequency, ensuring compatibility with the existing power system.

The rated capacity of the transformer is 1600 kVA and above, with strong power handling capacity, which can meet the high load requirements of wind power generation system. The insulation level of the transformer is designed to withstand 185 kV lightning impulse voltage, provide reliable power protection, and prevent damage to equipment caused by emergencies such as lightning strikes.

In terms of ambient temperature, the transformer has strong adaptability and can operate normally in the range of -45 degrees Celsius to +40 degrees Celsius, suitable for various harsh environments. Its design allows the top oil temperature rise to not exceed 55 degrees Celsius, and the temperature rise of both low-voltage and high-voltage windings does not exceed 65 degrees Celsius. These parameters ensure the safety and reliability of the equipment when running under high load.

The noise level of the transformer is controlled below 55 decibels, which meets the environmental protection and noise control standards and is suitable for places where low-noise operation is required. Its protection level is IP33D, with good dust and water resistance, suitable for outdoor installation and able to withstand the influence of various weather conditions.